大功率晶体管的保护电路

大功率晶体管调速系统中作为开关元件使用时，共优点是开关频率比可控硅的高，但是不注意保护就容易损坏。着重研究过电流故障，并对保护作用的影响进行了分析，进而提出了防止过电流的方法和工作原理。     

基于混沌电路的一种混合噪声调制雷达引信

提出了一种基于混沌电路的随机脉位调制（RPPM）和随机二相码调相（RBCPM）混合调制的雷达引信系统。介绍了该引信波形的数学模型，平均模型函数及引信的实现框图和工作原理，研究了基于混沌电路的混合调制信号的产生方法，这种引信波形不仅具有结构简单和易于处理等特点，而且具有良好的测距和测速性能，以及极低的截获概率和很强的抗干扰特性。     

钢缆带式输送机驱动轮的更换方法

钢缆带式输送机在长期使用过程中 ,它的驱动轮轴承以及齿轮联轴器都要磨损 ,最终导致磨损超标。为了保证设备运行安全 ,必须解决它的更换问题。针对这一问题 ,介绍了运用松驰牵引钢丝绳的方法 ,实现了不截断牵引钢丝绳进行驱动轮的整体更换 ,通过对平煤集团一矿 4个驱动轮的更换 ,证明这种方法简便易行 ,安全可靠。     

VLSI Implementation of Forward Error Control Technique for ATM Networks

In asynchronous transfer mode (ATM) networks, fixed length cells of 53 bytes are transmitted. A cell may be discarded during transmission due to buffer overflow or a detection of errors. Cell discarding seriously degrades transmission quality. The quality degradation can be reduced by employing efficient forward error control (FEC) to recover discarded cells. In this paper, we present the design and implementation of decoding equipment for FEC in ATM networks based on a single parity check (SPC) product code using very‐large‐scale integration (VLSI) technology. FEC allows the destination to reconstruct missing data cells by using redundant parity cells that the source adds to each block of data cells. The functionality of the design has been tested using the Model Sim 5.7cXE Simulation Package. The design has been implemented for a 5 ° 5 matrix of data cells in a Virtex‐E XCV 3200E FG1156 device. The simulation and synthesis results show that the decoding function can be completed in 81 clock cycles with an optimum clock of 56.8 MHz. A test bench was written to study the performance of the decoder, and the results are presented.     

一种以太网兼容的综合话音/数据传输协议

本文提出一种与现有以太网兼容的综合话音/数据协议.描述了协议模型及实现方法.并用PASCAL语言在IBM-PC机上模拟研究了该协议的性能.模拟结果表明,该协议能满足话音的实时要求,性能良好,且数据传输性能没有明显下降.协议克服了以太网传输话音延迟不确定的缺点.     

一种平面魔T结构的研究

为在小体积范围内产生雷达和信号、差信号，介绍了一种宽带平面型魔T结构的实现方法。通过选取合适的电路结构，并借助微波EM分析软件，在微带线和槽线的基板上实现了平面型魔T结构电路功能，在较宽的频带内实现了良好的幅相特性，并给出了测试结果。同时表明作为一种传输线结构二槽线，有其独特的优点和应用价值。     

时钟电路的电磁兼容性设计

对时钟电路设计中的3个主要问题：阻抗、传输延迟以及容性负载分别进行了阐述、分析与计算，得出了能够改善时钟电路电磁兼容性（EMC）的设计方法，并通过实践得以证实。     

基于PMM8731和SI-7300的步进电机驱动电路

PMM8731是日本三洋电机公司生产的步进电机脉冲分配器。而SI-7300则是日本三青公司生产的高性能步进电机集成功率放大器。它们和单片机一起可构成一种高效电机控制驱动电路。文中介绍了PMM8713与SI-7300的功能 ,给出了由它们组成的功率驱动电路及其在步进电机上的应用方法     

数据通信网综合网管的设计分析

结合TMN电信管理网的体系结构．对数据通信网综合网管的结构和功能进行了分析。     

Numerical modelling of the propagation of fast landslides using the finite element method

This paper proposes a two‐dimensional (2D) model for the analysis of the propagation of fast landslides involving a fluidized material such as debris and mud flows, flowslides and avalanching flows. The model is based on the Navier–Stokes depth‐integrated equations. To incorporate the effect of steep slopes and centrifugal forces due to the high velocities characterizing the flowslides and the bed curvature, a curvilinear system of reference is used. The corresponding equations of motion are complemented by depth‐averaged constitutive equations and bed friction laws. The resulting set of differential equations are solved using the two‐step Taylor–Galerkin algorithm. This algorithm has been used by the authors to solve hydraulic and dam‐break problems using the finite element method. Owing to the importance of the source term compared to the advection component, the proposed algorithm follows a splitting scheme using a fourth‐order Runge–Kutta method for integrating the friction and slope components. The performance of the overall approach has been checked in a number of examples. The analysis of the results provides insights into the key elements of the model and shows the adequacy of the method to solve real problems where merging and splitting of the flow occur. Copyright © 2004 John Wiley & Sons, Ltd.